Loading product category
An action camera mount for a Saigon trip depends on the gear you already have, not the camera brand. BigBike carries Kewig helmet and windscreen fittings, camera-side heads and complete clamp or pole kits. Bring any existing base and arm.
| Type | Strengths | Limitations |
|---|---|---|
| Helmet, windscreen: X3-GP, X2 | Chin-bar adhesive or padded windscreen clamp | Needs chin bar or windscreen |
| Camera-side heads: X1, X4-B3, X4-B6, R22-A, R22-B | Swap the head, keep base and arm | Not complete mounts, must match |
| Complete kits: R22B-C13, R14 kit, QG-2 pole | Clamp kits or telescopic pole | Check tube size, pole shakes more |
Check existing hardware first. A camera-side head cannot attach directly to the bike, so match it to the base and arm you brought. Without those parts, look at a complete kit or a helmet or windscreen fitting. Separate threaded cameras and GoPro fittings from DJI magnetic attachments.
For Osmo Action 6, choose the X4-B6 magnetic quick-release. DJI Action 3, Action 4, Action 5 Pro and Osmo 360 use X1 or X4-B3, depending on the connection already installed. The Action 6 head uses a different magnet orientation, so no cross-fitting. Kewig lists X1 with folding GoPro prongs, while the X4 versions use a 1-inch ball for a matching arm.
Kewig specifies R22-A for Insta360 via a 1/4-inch thread and R22-B with GoPro-style prongs, both on the 1-inch ball system. No new base is needed. The arm grips the base and head balls, so changing cameras means a matching head, not another base. The quick-release head slides sideways and locks with a spring latch. Check the exact model in-store.
Choose by release mechanism and viewpoint. Kewig lists R22B-C13 for 16 to 45 mm tubes, the R14 kit and pole for 12 to 45 mm. R22B-C13 has a release button and a screw needing its own wrench. The R14 kit links clamp, arm, ball head and camera base. Both end in GoPro prongs. QG-2 clamps round tubes and extends for wider shots with Insta360 or GoPro; phones need a separate holder.
Bring your own full face helmet. Rental bikes rarely have windscreens and rental helmets are often open face, so check what mounting points exist. The X3-GP helmet chin mount uses a bendable adhesive base below the chin bar, with a small tether as backup. Removing it is hard. The X2 windscreen clamp takes edges up to 8 mm thick, per Kewig.
Longer pole extensions shake more. Helmet footage follows your head, a bike-mounted camera follows the bike, and a rigid bracket will not remove all vibration. Tighten carefully and recheck after the first rides. This category sells mounts, not cameras. The bike-mounted SCS Cam-S sits in the Bluetooth communicators category; BigBike's touring camera blog helps pick one. All Kewig items have a 12-month defect warranty, excluding wear.
BigBike has operated since 2014 at 79/30/52 Au Co, Hoa Binh Ward, Ho Chi Minh City. Staff match camera connectors, try the chin base on your helmet and test a clamp on your bars. Bring your bike.
An action camera mount for a Saigon trip depends on the gear you already have, not the camera brand. BigBike carries Kewig helmet and windscreen fittings, camera-side heads and complete clamp or pole kits. Bring any existing base and arm.
| Type | Strengths | Limitations |
|---|---|---|
| Helmet, windscreen: X3-GP, X2 | Chin-bar adhesive or padded windscreen clamp | Needs chin bar or windscreen |
| Camera-side heads: X1, X4-B3, X4-B6, R22-A, R22-B | Swap the head, keep base and arm | Not complete mounts, must match |
| Complete kits: R22B-C13, R14 kit, QG-2 pole | Clamp kits or telescopic pole | Check tube size, pole shakes more |
Check existing hardware first. A camera-side head cannot attach directly to the bike, so match it to the base and arm you brought. Without those parts, look at a complete kit or a helmet or windscreen fitting. Separate threaded cameras and GoPro fittings from DJI magnetic attachments.
For Osmo Action 6, choose the X4-B6 magnetic quick-release. DJI Action 3, Action 4, Action 5 Pro and Osmo 360 use X1 or X4-B3, depending on the connection already installed. The Action 6 head uses a different magnet orientation, so no cross-fitting. Kewig lists X1 with folding GoPro prongs, while the X4 versions use a 1-inch ball for a matching arm.
Kewig specifies R22-A for Insta360 via a 1/4-inch thread and R22-B with GoPro-style prongs, both on the 1-inch ball system. No new base is needed. The arm grips the base and head balls, so changing cameras means a matching head, not another base. The quick-release head slides sideways and locks with a spring latch. Check the exact model in-store.
Choose by release mechanism and viewpoint. Kewig lists R22B-C13 for 16 to 45 mm tubes, the R14 kit and pole for 12 to 45 mm. R22B-C13 has a release button and a screw needing its own wrench. The R14 kit links clamp, arm, ball head and camera base. Both end in GoPro prongs. QG-2 clamps round tubes and extends for wider shots with Insta360 or GoPro; phones need a separate holder.
Bring your own full face helmet. Rental bikes rarely have windscreens and rental helmets are often open face, so check what mounting points exist. The X3-GP helmet chin mount uses a bendable adhesive base below the chin bar, with a small tether as backup. Removing it is hard. The X2 windscreen clamp takes edges up to 8 mm thick, per Kewig.
Longer pole extensions shake more. Helmet footage follows your head, a bike-mounted camera follows the bike, and a rigid bracket will not remove all vibration. Tighten carefully and recheck after the first rides. This category sells mounts, not cameras. The bike-mounted SCS Cam-S sits in the Bluetooth communicators category; BigBike's touring camera blog helps pick one. All Kewig items have a 12-month defect warranty, excluding wear.
BigBike has operated since 2014 at 79/30/52 Au Co, Hoa Binh Ward, Ho Chi Minh City. Staff match camera connectors, try the chin base on your helmet and test a clamp on your bars. Bring your bike.
