Loading product details
450.000 ₫
IN STOCK
The Kewig X2 windscreen camera mount grips a screen edge up to 8 mm thick, with no drilling. The clamp base tightens by hand knob and does not take round tubes or mirror stems. Its GoPro-style three-prong mount takes DJI cameras through the Kewig X1 magnetic mount. Price 450,000 VND.
Screen-edge clamp
A camera on the handlebars only gets the dash and the tank cap, while the road ahead on a trip up north falls out of frame. The clamp base tightens by hand knob on a windscreen edge up to 8 mm thick, with no drilling. The mount does not take round tubes or mirror stems. A bike without a windscreen has nowhere to clamp. The jaws are lined with rubber pads; BigBike makes no promise the screen will not scratch. BigBike has test-clamped it on the windscreen of an adventure bike at the shop.
Cameras it takes
When the camera has a GoPro-style two-prong foot, it slots into the three-prong mount. BigBike has fitted a GoPro camera, and has fitted the Kewig X1 magnetic mount and then a DJI camera. Two prong joints set the tilt and rotation, then lock down. The knurled thumb screw tightens by hand, with a hex key for extra torque. BigBike has test-threaded a ball head into the 1/4 inch hole on top of the clamp base.
Fitting
Before ordering, pick a clear stretch of windscreen edge wide enough for both jaws.
Measure the screen edge → Loosen the hand knob → Close the jaws on it → Tighten the hand knob → Fit the camera → Set the angle, lock the screw.
BigBike makes no promise on vibration at any speed. On the expressway, stop at a fuel station to check and retighten the knob and screw. The box holds the mount with its clamp base and a hex key.
The clamp base gives you a camera spot without drilling the bike.
Sitting on the windscreen, the camera is above the handlebars and gets the road ahead.
Two prong joints set tilt and rotation, and locking them holds the angle.
The clamp comes off by hand and moves to another bike with a windscreen.
A bike without a windscreen, or a screen edge over 8 mm thick, cannot use it.
The rubber pads reduce the risk of scratches; BigBike makes no promise to rule them out.
BigBike makes no promise on vibration at any riding speed.
A DJI camera needs the Kewig X1 magnetic mount bought separately before it will fit.
| Screen or camera | Does the X2 work |
|---|---|
| Adventure or touring bike with a windscreen, edge up to 8 mm thick | Yes. BigBike has test-clamped it on an adventure bike windscreen at the shop |
| Windscreen edge over 8 mm thick | NO. The jaws cannot close on it |
| Aftermarket screen, angled sportbike screen, cruiser screen | Measure the edge and send BigBike a photo of the spot before ordering |
| Bike without a windscreen | NO. Nowhere to clamp. See the Kewig R22B-C13 handlebar clamp set |
| Mirror stem, handlebar, round tube | NO. The X2 only clamps a flat screen edge |
| GoPro camera | Yes, slots straight into the three-prong mount. BigBike has fitted one |
| DJI Osmo Action, Osmo 360 | Yes, through the Kewig X1 magnetic mount. BigBike has fitted the X1 on the X2 and then the camera |
| Insta360 or other camera with a GoPro-style two-prong foot | Fits by the prong standard. BigBike has not tried it; message the camera name before ordering |
| Camera without a GoPro-style two-prong foot | NO direct fit. Message BigBike |
A windscreen edge up to 8 mm thick and a camera with a GoPro-style two-prong foot take the Kewig X2. A bike without a windscreen, see the Kewig R22B-C13 handlebar clamp set.
| Type | Windscreen-edge camera mount, aluminium alloy clamp base, reinforced plastic arm, black |
|---|---|
| Clamping spot | Windscreen edge, top or side. Does not clamp round tubes, does not fit mirror stems |
| Screen edge | Up to 8 mm thick |
| Clamp base | One fixed jaw, one moving jaw, rubber-padded. Tightened by a hand knob on the side, no drilling |
| Camera mount | GoPro-style three-prong mount. Knurled thumb screw, hand-tightened, hex key in the box for extra torque |
| Angle joints | Two prong joints: one between mount and body, one between body and arm. Set tilt and rotation, then lock down |
| Expansion thread | One 1/4 inch threaded hole on top of the clamp base. BigBike has test-threaded a 1/4 inch ball head into it |
| Weight | 145 g |
| Tested by BigBike | Clamped on an adventure bike windscreen at the shop. GoPro camera fitted. Kewig X1 magnetic mount fitted, then a DJI camera |
| In the box | 1 camera mount with clamp base, 1 hex key |
| Warranty | 12 months |
79/30/52 Au Co, Hoa Binh Ward, Ho Chi Minh City