Loading product details
620.000 ₫
IN STOCK
The Kewig HB6 mirror-stem crossbar with angle joints bolts to both mirror stems through a 10 mm hole at each end. The mirrors screw back on and stay. The joints at both ends set the height of the 22 mm bar and its distance from the front of the bike. Length 33 to 45.7 cm, price 620,000 VND.
Angle joints
Every bike has its mirror stems at a different angle. Turn the joints at both ends to set the bar height and its distance from the front of the bike, then tighten them. The 22 mm bar only adds a clamping spot. BigBike has test-clamped the Kewig C2U2 clamp, the Kewig M36-C1S phone holder and the Kewig M26S-1 onto the bar. If your mirror stems already sit at a good height, the fixed-angle Kewig HB3-H is enough.
Length and riser
Before ordering, measure the distance between the two mirror stems. Turn the middle tube to set the length from 33 to 45.7 cm, then tighten the two lock nuts, the same way as the Kewig HB4-L. The 10 mm holes take M8 and M10 mirror bolts. BigBike has test-fitted it on the two mirror stems of motorbikes. Some bikes take it straight on, some need a Kewig mirror riser bolt when the stems sit low against the headlight cowl.
Installation
Before a highway trip, fit and adjust the crossbar at home.
Measure the stems → Take the mirrors off → Seat the flat tabs → Screw the mirrors back → Turn the joints → Tighten the nuts.
The box holds the crossbar, a flat spanner and a hex key. The mirror riser bolt is bought separately. The crossbar is a spot to clamp a holder or ball clamp onto; it does not hold a phone or camera by itself.
The end joints let you move the holder to suit where your mirror stems sit.
Both mirrors screw back on top of the flat tabs after fitting.
Scooters with fully covered handlebars can still take this mirror-stem crossbar.
The mirrors have to come off before the crossbar goes on.
Bikes with mirror stems low against the headlight cowl need a Kewig mirror riser bolt, sold separately.
The crossbar reaches 45.7 cm; stems further apart than that will not fit.
BigBike makes no promise on load or riding speed with items clamped on this crossbar.
| Mirror stem or item clamped on | Does the HB6 work |
|---|---|
| M8 or M10 mirror bolts, stems 33 to 45.7 cm apart | Yes. BigBike has test-fitted it |
| Mirror stems low against the headlight cowl | Yes, with a Kewig mirror riser bolt. BigBike has test-fitted it with the riser bolt |
| Angled stems where a fixed bar sits too low or too close to the front | Yes. Turn the end joints to set height and reach |
| Stems further apart or closer than 33 to 45.7 cm | NO. The bar will not adjust that far |
| Mirror threads other than M8 and M10 | Send BigBike a photo of the mirror stem before ordering |
| Scooter with fully covered handlebars | Yes. The bar bolts to the mirror stems, no bare handlebar needed |
| Kewig C2U2 ball clamp on the bar | Yes. BigBike has test-clamped it |
| Kewig M36-C1S phone holder on the bar | Yes. BigBike has test-clamped it |
| Kewig M26S-1 phone holder on the bar | Yes. BigBike has test-clamped it |
| Other phone holders with a 22 mm tube clamp | Fits the tube size. BigBike has not tested them on this bar |
| Mirror-mount holders, stick-on bases, two-prong mounts | NO. The bar only takes items with a tube clamp |
Choose the Kewig HB6 when you need to adjust the bar position and your mirror stems are 33 to 45.7 cm apart. Add a Kewig mirror riser bolt if the stems sit close to the cowl.
| Type | Crossbar bolted to both mirror stems with angle joints, 22 mm bar, aluminium alloy, black |
|---|---|
| Mounting ends | Two flat tabs, each with a plain 10 mm hole. Pass the mirror bolt through the hole, then screw the mirror back on top. Takes M8 and M10 mirror bolts |
| Angle joints | Pivot joints at both ends set the bar height and its distance from the front of the bike, then tighten |
| Length adjustment | Turn the middle tube to lengthen or shorten it, from 33 to 45.7 cm. Tighten the two nuts to lock |
| Bar | Round 22 mm tube, the clamping spot for a phone holder or ball clamp with a 22 mm tube clamp |
| Low mirror stems | Stems against the headlight cowl need a Kewig mirror riser bolt, M8 or M10 to suit the bike |
| Weight | 350 g |
| Test-fitted by BigBike | Bolted to the two mirror stems of motorbikes, some straight on, some with the riser bolt. Onto the bar: Kewig C2U2 clamp, Kewig M36-C1S phone holder, Kewig M26S-1 phone holder |
| In the box | 1 crossbar, 1 flat spanner, 1 hex key. No riser bolt, no holder, no ball clamp |
| Warranty | 12 months |
79/30/52 Au Co, Ward 14, District 11, Ho Chi Minh City