Loading product details
205.000 ₫
IN STOCK
The Kewig ZYM-2 sun shade clips its two-prong mount into the three-prong slot on the back of the phone holder, tightened with a thumb screw, and shades the screen with a black shell and a tea-tinted shield. BigBike has test-fitted it on the Kewig M26S-1 holder without taking the holder off the bike. Price 205,000 VND.
On the holder back
The screen goes dark in the midday glare. The shell and the tea-tinted shield cover the top and front of the screen. The two-prong mount under the shade clips into the three-prong slot on the back of the holder and is tightened with a thumb screw. You need no tools and the holder stays on the bike. The holder grips the phone, not the shade. BigBike has test-fitted the shade on the Kewig M26S-1 phone holder, and it fits.
Shield and camera
When you want more cover, slide the tea-tinted shield out along the groove in the shell. Sliding it back in shortens the cover. The phone's rear camera stays clear. If you use a different holder, message BigBike with a photo of the holder back before ordering.
Fitting the shade
Before a highway run, leave the holder on the bike and get the shade ready. The box holds the shade and a thumb screw only, no holder. Find the three-prong slot on the holder back.
Clip the two-prong mount → Tighten the thumb screw → Slide the shield out → Put the phone back → Shake the shade to check.
The holder you have already set up on the bike stays put when the shade clips on.
The tea-tinted shield slides out for more cover and back in for less.
Plastic shade, weighs 300 g, measures 19.5 x 14.5 x 10 cm.
Only test-fitted on the Kewig M26S-1 holder. Ask first for any other holder.
The shade does not hold the phone. It works only together with a holder.
It shades the screen only and does not protect the phone from water.
BigBike does not promise how much wind the shade takes on the open road.
| Holder in use | Does the ZYM-2 work |
|---|---|
| Kewig M26S-1 phone holder | Yes. BigBike has test-fitted it, it fits |
| Other Kewig holders with a three-prong slot on the back | Message BigBike with a photo of the holder back before ordering. Not test-fitted |
| Kewig holders with no three-prong slot on the back | NO. Nowhere for the two-prong mount to clip in |
| Holders from other brands | Message BigBike with a photo of the holder back before ordering. Not test-fitted |
| No holder yet | Buy the Kewig M26S-1 holder, then clip the shade on |
| Bike with no windscreen, ridden in daytime sun | Yes. This is what the shade is for |
| Bike with a windscreen, long highway runs | Fits mechanically. BigBike does not promise how much wind the shade takes |
| Phone with a rear camera | Yes. The shade does not cover the rear camera |
On a Kewig M26S-1 holder it clips straight on. For any other holder, message BigBike with a photo of the holder back before ordering.
| Type | Sun shade that clips to the back of a phone holder, sold separately, plastic, black shell, tea-tinted shield |
|---|---|
| Mounting to the holder | Two-prong mount under the shade clips into the three-prong slot on the holder back, tightened with the thumb screw in the box. No tools, holder stays on the bike |
| Holders that fit | Kewig M26S-1 phone holder, test-fitted by BigBike. Message BigBike before ordering for other holders |
| Shield | Tea-tinted shield extending forward, slides in and out of the shell groove to lengthen or shorten the cover |
| Phone rear camera | Not covered when the shade is fitted |
| Shade size | 19.5 x 14.5 x 10 cm |
| Weight | 300 g |
| Test-fitted by BigBike | Clipped onto the back of a Kewig M26S-1 holder at the shop, fits |
| In the box | 1 sun shade, 1 thumb screw. No holder |
| Warranty | 12 months |
79/30/52 Au Co, Ward 14, District 11, Ho Chi Minh City