Loading product details
196.000 ₫
IN STOCK
When the handlebar is out of room, the Kewig C9P claw clamp grips any round tube of 12 to 45 mm on the bike. Its only output is one 1-inch ball, which takes a J1S or J2S arm. Buy the arm and the holder separately. Price 196,000 VND.
How it grips
If the handlebar is shrouded in plastic or already full, the clamp grips another tube on the bike. The side knob tightens the jaws. You fit it by hand, no tools needed. The clear bag holds one clamp only, with no pads and no tools.
What comes next
Before ordering, measure the tube where you plan to clamp: only pick it if it is within 12 to 45 mm.
BigBike has test-clamped it on a handlebar, a crash bar, a mirror stem and a handlebar extension bar. The clamp has one 1-inch ball only; it takes a Kewig J1S or J2S arm, and only then a phone holder or a camera mount with a 1-inch ball. For a plain handlebar, pick the Kewig C2U2 handlebar clamp instead.
Installation
The clamp goes on the tube before the arm and the holder are fitted.
Loosen the knob → Seat the clamp around the tube → Tighten the jaws → Fit the arm onto the ball → Fit the holder.
To move the clamp from the commuter bike to the touring bike, loosen the side knob and lift the clamp off the tube. The new spot must also be within the clamping range. Seat the clamp in the new spot and tighten the knob again.
The jaws have a rubber coating.
The clamp weighs 137 g.
The side knob tightens or loosens the clamp by hand.
The clamp alone holds no phone or camera; it needs an arm and a holder.
The bag holds the clamp only.
Tubes outside 12 to 45 mm cannot be clamped.
BigBike makes no promise about load capacity.
| Bike group | Does it clamp, and where |
|---|---|
| Adventure and touring: CB500X, Africa Twin, V-Strom, BMW GS, Himalayan | Yes, the best match. Clamp the crash bar, the handlebar or the bar behind the windscreen. A crash bar vibrates less than the handlebar |
| Fully shrouded scooters: Lead, Vision, Air Blade, SH, Vario | Yes, but not on the handlebar. Clamp the mirror stem or the windscreen brace. Measure the spot first |
| Yamaha PG-1 | Yes. 22 mm handlebar, rack or frame |
| Underbones: Wave, Blade, Sirius | Yes. Bare handlebar section or mirror stem |
| Manual bikes: Winner X, Exciter 155 | Yes. Handlebar or handlebar brace |
| Naked bikes: CB150R, CB650R, MT-07, Z900, Duke | Yes. 22 or 28.6 mm handlebars, both within range |
| Cruisers: Harley, Rebel | Yes for tubes up to 45 mm. 25.4, 31.8, 35 and 38 mm clamp fine. 51 mm does not |
| Sportbikes: CBR, R15, R3, Ninja | Limited. The bare section is very short. Message BigBike with a photo of the front end before ordering |
Measure the tube where you plan to clamp: 12 to 45 mm clamps fine. Not sure? Send BigBike a photo of the spot.
| Type | Claw clamp for tubes, one 1-inch ball as output |
|---|---|
| Material | Aluminium alloy, stainless steel, TPU. CNC-machined, rubber-coated jaws |
| Colour | Black |
| Weight | 137 g |
| Clamping range | Round tubes of 12 to 45 mm diameter |
| Tightening | Side hand knob, tighten by hand, no tools needed |
| Output | Exactly one 1-inch ball, 25.4 mm, RAM size B. No socket, does not join the 17 mm system |
| Connects to | Kewig J1S and Kewig J2S double-socket 1-inch arms. Test-fitted by BigBike with RAM Mount arms |
| Packaging | Clear bag, product visible. One clamp only, no tools, no pads |
| Warranty | 12 months |
79/30/52 Au Co, Ward 14, District 11, Ho Chi Minh City